Erection, Testing and Maintenance Facilities: We are equipped with all tools & tackles, testing equipments & maintenance facilities like…..
Maintenance Activities
1. A team of qualified operators and engineers to take care of daily monitoring of equipment condition, preventive and breakdown maintenance.
2. A complete set of procedures for recording of parameters, preventive maintenance schedules for individual equipment in sub station.
3. A set of GUIDELINES for the various types of faults in the substation their probable causes and remedies along with the list of spares necessary for the effective and trouble free operation of the substation.
Important Tools for Erection Activities
01. | Derricks – 10 mts, 12 mtr, 16 mtr height suitable for 2.5 tonnes | 03 Each |
02. | Tripods – 6 mtr height & Bipod | 02 Each |
03. | Jack & Spindle – 5 ton & 10 ton Capacity | 02 Each |
04. | Hydraulic Jack – 25 ton Capacity | 02 Each |
05. | Chain Pulley blocks – 3 ton& 5 ton Capacity | 01 Each |
06. | Normal Pulleys, Pulleys with clearing – 1 way, 2 way, 3 way | 05 Set Each |
07. | Winch, Tirfor – 5 ton Capacity | 01 Each |
08. | Torque wrench of 5000 Lbs Capacity | 01 No. |
09. | Turn table – 5 ton Capacity | 01 No |
10. | Ladders, Wooden Slippers, Garfil Ropes, Sealing & Wire rope bundles etc. | 3 Bdls |
11. | Come along clamps for stringing of transmission lines | 05 Nos |
12. | Spanner Sets, Gasket Punching Set | 4+2 Sets |
13. | Template support jacks screw type | 50 Nos. |
14. | Dewatering pumps – Electrical & Diesel | 02 Each |
15. | Transformer Coil lifting device with slings | 01 Set |
16. | Shuttering Plates | 08 Sets |
Important Tools for Fabrication Work
01. | Gas cutting set | 02 Nos. |
02. | Gas Welding set | 02 Nos. |
03. | Welding Machines – Single Phase & Three Phase | 02 Nos. |
04. | Drill Machines – Hammer Drill, Hand Drill, Pillar Drill etc. | 03 Each |
05. | Spray gun with compressor for Painting Activities | 01 Set |
06. | Jig Saw and Angle Grinder | 01 Each |
07. | Cutting/Sharing Machine | 01 Each |
08. | Power Press 50 Tons | 02 Each |
09. | Threading Machine | 01 Each |
10. | Oil Furnace | 01 Each |
Important Tools For Cable Laying, Stringing Of Lines & Terminations
01. | Cable laying roller and Conductor Paving Rollers | 20 Each |
02. | Turn buckles | 08 Nos. |
03. | Conductor and earth wire Crimping Machines | 02 Nos. |
04. |
Crimping tools – Manual type upto 6 sqmm, 110 400 sqmm |
4+2+1 Nos. |
05. | Tractor and Trolley- Mahindra B-275 | 01 No. |
06. | Mahindra Bolero Pick up Van | 02 No. |
Important Tools For Cable Laying, Stringing Of Lines & Terminations
01. |
Meggar – 1000 V, 1000 Megaohms: 2000 V, 2500 Megaohms : 5000 V, 10000 Megaohms |
02 Each |
02. | Each Tester – 0 to 1 Ohms & 0 to 10 Ohms | 02 Each |
03. | Multimeters – Analog & Digital Type, Phase sequence Meters | 04 Nos |
04. | Tong Testers | 02 Nos |
05. | Micro – ohm meters | 01 No |
06. | Time interval meter 0 – 100 secs | 11 Nos |
07. | Primary Current Injection Kit – 0 to 400 Amps | 01 No |
08. | Secondary Current Injection Kit – 0 to 20 Amps | 01 No |
09. | Rheostats – 8Am 15A | 01 Each |
10. | Dimmer stats – Single Phase and Three Phase upto 28 A Capacity | 01 Each |
11. | Transformer oil testing kits | 01 No |
12. | Transformer oil Filtration Plant – Cap. 250 GPH | 01 No |
General Equipments
01. | Pipe Bending Machines | 02 Nos |
02. | Wireman Tool Kit | 04 Nos |
List of Tools and Equipments with the Company
Sr. No. | Description of Item | Quantity |
01. |
Concrete Mixers A. Electrically Operated B. Diesel Operated |
2 No 2 No |
02. |
Concrete Vibrators A. Electrically Operated B. Diesel Operated |
2 No 1 No |
03. | Road Roller – 8 MT Capacity | 1 No |
04. | Steel Shuttering Plates | 2000 No. |
05. | Plyood Shuttering | For 3000 Sq. Ft. |
06. | Steel spans (Acrow) 2.0 - 4.0 mts. | 250 Nos |
07. | Steel props (Acrow) 2.0 – 3.75 mts. | 500 Nos |
08. | Earth rammer for internal compaction | 1 No |
09. | Steel Scaffolding for plaster etc. | For 10000 Sq. Ft. |
10. | Drilling Machines | 5 Nos |
11. | Dewatering Pump | 2 Nos |
12. | Mahindra- 575 Tractor with Drilling & Lifting Machine | 1 Nos |